Jinko 3.6Kw 48V Single Phase Hybrid Solar Inverter

Description Compact Solar Power for Small Kenyan Homes and Apartments Not every Kenyan home needs a 5kW or 8kW hybrid inverter. For a one-bedroom flat in Kilimani, a bedsitter in Roysambu, a small retail kiosk in a Nairobi estate, or a rural family running lights and a TV, the Jinko JKS-3.6K-SG03LP1-EU is often the right-sized answer — and paying for capacity you’ll never use is a waste of your money. This is the entry point into Jinko’s hybrid inverter family. It shares the same core technology as the larger models — dual MPPT trackers, hybrid on-grid/off-grid/battery management, IP65 weatherproofing, lithium and lead-acid compatibility — but in a frame light enough for a single installer to mount, small enough to fit beside a distribution board, and affordable enough that tenants and first-time solar buyers can start their transition without a massive upfront commitment. The Generator Replacement Story Many Kenyan households and small shops currently run petrol or diesel generators for backup power during outages. A 3.5kVA generator costs money to buy, burns fuel at KSh 200 per litre, needs oil changes, gets stolen, pollutes, and makes noise that annoys neighbours. The JKS-3.6K-SG03LP1-EU paired with solar panels and a lithium battery replaces that generator entirely — silent, no fuel cost, no oil changes, no maintenance beyond occasional panel cleaning, and no 3am wake-ups to refill the tank. For buyers specifically looking to retire an old generator, this is the model to look at first. The 3,600W continuous output matches what most 3.5kVA generators actually deliver in practice (generator nameplates overstate real-world performance), and the 7,200W peak output absorbs the inrush currents of fridge compressors and water pumps — the loads that typically cause generator starter batteries to fail. Who This Inverter Is Designed For The JKS-3.6K-SG03LP1-EU is the correct size for the following profiles of Kenyan buyer: Apartment and bedsitter residents: Daily consumption typically 3–10 kWh covering lights, phone charging, TV, small fridge, Wi-Fi, laptop. A 3.6kW inverter with 4–6 solar panels and a 5kWh lithium battery covers this load with comfortable headroom. One and two-bedroom family homes: Consumption in the 8–15 kWh per day range. Works well with 6–8 panels and a 5–10kWh battery bank. Rural homesteads running basic loads: Lights, a radio or small TV, phone charging, maybe a small fridge or deep freezer. The 3.6kW size matches the realistic load without oversizing. Small kiosks and retail stalls: Shop lighting, phone charging station, small fridge for soft drinks, M-Pesa equipment, CCTV. Daily consumption 5–12 kWh. Tenants who will move: Because the JKS-3.6K-SG03LP1-EU is light (20.5 kg) and compact (330×580×232 mm), it can be uninstalled and relocated when you move house without the logistical headache of moving a heavy commercial-class inverter. First-time solar buyers on tight budgets: Starting with 3.6kW lets you enter solar at the lowest possible system cost and upgrade later if your needs grow. What It Won’t Do Honesty matters. The JKS-3.6K-SG03LP1-EU is the wrong inverter for: Homes running air conditioning — even a single 1.5HP AC consumes most of the rated output with no headroom for other loads. Choose the 5kW or 8kW instead. Houses with instant electric showers or immersion water heaters drawing 3,000W — these will overload this class of inverter. Workshops with power tools, welders, or pumps — the motor startup surges exceed the 7.2kW peak capacity. 4-bedroom homes with heavy simultaneous loads — step up to the 5kW or 8kW for proper headroom. Practical Starter Packages The JKS-3.6K-SG03LP1-EU works best as part of a pre-sized starter package. Three realistic builds: Starter Pack A — Apartment / Bedsitter: 4 × 450W solar panels (1.8kW DC) JKS-3.6K-SG03LP1-EU 5kWh lithium battery from our Jinko, Renergy, or Vestwood range. Covers lights, laptop, TV, phone charging, small fridge, Wi-Fi router. Starter Pack B — Two-Bedroom Home: 6 × 550W panels (3.3kW DC) JKS-3.6K-SG03LP1-EU 10kWh lithium battery (Jinko, Renergy, or Vestwood). Covers full household essentials including a freezer, multiple rooms of lights, entertainment, and overnight backup. Starter Pack C — Small Retail Kiosk / Shop: 5 × 580W Jinko Tiger Neo panels (2.9kW DC) JKS-3.6K-SG03LP1-EU 5kWh lithium battery. Covers shop lighting, refrigeration for drinks, phone-charging station, CCTV, M-Pesa equipment, and a small fan. Room to Grow: Parallel Expansion One underrated feature of the JKS-3.6K-SG03LP1-EU is that it supports parallel operation. If your household or business grows over time, you can add a second 3.6kW unit later and double your capacity to 7.2kW without replacing the original. This is particularly useful for tenants who expect to move into a larger house within a few years, or small businesses that plan to expand. Detailed Electrical Data Max DC Input Power: 4,680W Rated PV Input Voltage: 360V MPPT Voltage Range: 125–425V Start-up Voltage: 125V Max PV Input Current: 13A per MPPT (2 trackers, 1 string each) Rated AC Output: 3,600W / 15.7A at 230V Max AC Output: 3,960W Peak Off-Grid Power: 7,200W for 10 seconds Output Frequency: 50/60 Hz Battery Voltage Range: 40–60V Max Charging Current: 90A Max Discharging Current: 90A Max Efficiency: 97.6% European Efficiency: 97.0% Integrated Protections: lightning, anti-islanding, PV reverse polarity, insulation resistor, residual current, over-current, over-voltage, short circuit, over-temperature Display: LCD with status indicators Enclosure: IP65 metal Pairing This Inverter With a Complete System To turn this inverter into a functioning solar installation, you’ll also need solar panels (typically 4–8 modules from our solar panel catalogue), a lithium battery from our Jinko, Renergy, or Vestwood ranges, DC and AC protection hardware from our circuit breaker section, mounting hardware, and professional installation by an EPRA-certified technician. Unsure about sizing? The solar calculator walks you through the basics, or you can request a quote for a complete starter package. WhatsApp 0794 917 789 for direct consultation. Questions Buyers Ask About the Jinko 3.6kW Is 3.6kW enough for a Kenyan home? It depends on your home’s real consumption pattern. For apartments, bedsitters, one and two-bedroom houses, and small kiosks running lights, TV, phone charging, Wi-Fi, a fridge, and basic appliances, 3.6kW is genuinely adequate. For any home with air conditioning, electric water heating, or running multiple heavy appliances simultaneously, you need to step up to the 5kW or 8kW model instead. Will this replace my petrol or diesel generator? Yes, for typical backup applications. Paired with solar panels and a lithium battery, the JKS-3.6K-SG03LP1-EU delivers 3,600W continuous (matching most 3.5kVA generators in real-world conditions) with a 7,200W surge capacity that handles fridge compressors and water pumps. Unlike a generator, it produces zero noise, burns no fuel, needs no oil changes, and never runs out of petrol during a storm. Can one installer mount this inverter alone? Yes. At 20.5 kg, the JKS-3.6K-SG03LP1-EU is light enough for a single technician to lift, hold against a wall, and bolt into position without needing a second pair of hands. Larger inverters at 30 kg typically require two installers for safe mounting. How many solar panels does this inverter support? Up to 4,680W of DC input, which works out to roughly 8 × 580W panels, 8 × 550W panels, or 10 × 450W panels depending on which solar panels you choose. The dual MPPT design lets you split panels across different roof orientations if needed. What battery size pairs best with the 3.6kW inverter? For most apartment and small-home applications, a 5kWh lithium battery is the sweet spot — enough overnight backup for essential loads without oversizing. Larger two-bedroom homes can step up to a 10kWh battery. Jinko, Renergy, and Vestwood lithium battery ranges all pair correctly with this inverter via CAN/RS485 BMS communication. Can I start without a battery and add one later? Yes. The JKS-3.6K-SG03LP1-EU runs in pure on-grid mode without any battery connected, so you can install it with just solar panels today and add battery storage in a few months when your budget permits. The upgrade requires no hardware changes to the inverter itself. What happens if I outgrow this inverter? Two options. First, because the JKS-3.6K-SG03LP1-EU supports parallel operation, you can add a second 3.6kW unit later and double your capacity to 7.2kW without removing the original. Second, you can sell this unit on the second-hand market (Jinko holds good resale value) and upgrade to a 5kW or 8kW model when your needs grow. Is this inverter suitable for a rental property? Yes. Its compact size, light weight, and wall-mountable design make it easy to uninstall and relocate when tenants move. This is a practical advantage over larger inverters that are effectively fixed installations once commissioned. What is the warranty and where do I buy it in Kenya? Jinko provides a 5-year standard manufacturer warranty on the JKS-3.6K-SG03LP1-EU. Bicity Solar Energy Suppliers stocks this inverter with manufacturer warranty and delivery to all 47 counties. WhatsApp 0794 917 789 or request a quote for current pricing.