Thermaltake Divider 370 TG ARGB BLACK MT case CA-1S4-00M1WN

Description Divider 370 TG ARGB Mid Tower Chassis Thermaltake designed a brand-new case series that containing stylish side panels and powerful airflow performance blending all the functionality into the Divider Series. Modern design with Divider 370 TG ARGB’s left panel gives the chassis a unique look while offering a great view of the interior. With three pre-installed ARGB PWM fans, you can enhance the cooling performance with exceptional customizable lighting. The Divider 370 TG ARGB Mid Tower Chassis is the next-gen gaming PC case for regular users, enthusiasts, and gamers, giving them unprecedented satisfaction.   Unique Side Panels Design with a Tempered Glass Window The exceptional feature of the Divider 370 TG ARGB is that the unique panel that comprised of a steel panel and a 3mm tempered glass window on the left side. The side panel is visually divided to create an unique look, and it is tool-free and easy to remove. Tempered glass window is thicker and more scratch-resistant compared to standard acrylic. Mesh Front Panel The Divider 370 TG ARGB comes with a large airflow-optimized stylish mesh panel at the front, offering a unique divided design and additional air intake through the mesh. Three Preinstalled ARGB PWM Fans The Divider 370 TG ARGB comes with three pre-installed hydraulic bearing 120mm ARGB PWM fans which can effectively lower the operation noise and enhance thermal efficiency. The fans’ lighting effect can be either controlled by the physical RGB button on the I/O panel or motherboard software from ASUS, GIGABYTE, MSI, and ASRock. There are 27 RGB lighting modes to play around with when using the physical RGB button, and it’s simple to switch between physical button control and motherboard software control by long pressing the RGB button for three seconds. PSU Cover & Pre-Installed Vertical GPU Holder The built-in PSU cover is designed to hide unsightly cables with overall good ventilation. The pre-installed GPU holder enables vertical GPU installation, but also helps reduce the weight on the PCI-E slots. Excellent Dust Filtration The Divider 370 TG ARGB has a well-designed removable magnetic fan filter on the top and the inner right side. At the base, the removable filter provides excellent dust protection and dirt reduction, ensuring a dust-free environment. &   Air Intake and Exhaust The cooling performance of the Divider 370 TG ARGB is excellent. The large airflow-optimized mesh panel at the front allow optimal air intake. Cooling exhausts are located at the rear of the case. On the top and right side, there are venting mechanisms for air intake or exhaust depends on the user’s overall PC layout design.   Excellent Hardware Support & Cooling Solution The Divider 370 TG ARGB has great hardware support. It can support a CPU cooler with a maximum height of 170mm, VGA with maximum length of 400mm (without radiator), a power supply with a length of up to 230mm (with HDD Cage), two 3.5″ HDDs with two 2.5″ SSDs or a total of four 2.5″ SSDs. When it comes to cooling, the Divider 370 TG ARGB comes preinstalled with three hydraulic bearing 120mm ARGB PWM fans which can effectively lower the operation noise and enhance the thermal efficiency, you can also choose to put three 140mm fans at the front and one 120mm fan at the rear. Moreover, it can hold up to three 120mm fans at the top, two 120mm fans on the right of the motherboard side. For radiator compatibility, it can support up to 360mm at the front and top.   Handy I/O Ports Two USB 3.0 and one HD Audio jack is placed on the top panel to grant direct access when needed. Fan Compatibility List 120mm 140mm 200mm Front 3 3 – Top 3 2 – M/B Side 2 – – Rear 1 – – All-in-One Compatibility List 120 Series 240 Series 360 Series 140 Series 280 Series 420 Series Front ● ● ● ● ● – Top ● ● ● ● ● – M/B Side ● ● – – – – Rear ● – – – – – Product Specs P/N CA-1S4-00M1WN-00 Series Divider Case Type Mid Tower Dimensions (H × W × D) 491 × 220.3 × 469.1 mm (19.3 × 8.7 × 18.5 inch) Net Weight 7.44 kg / 16.4 lbs Panel 3mm Tempered Glass × 1 Color Black Material SPCC Cooling System Front (intake): 120 × 120 × 25 mm ARGB PWM fan (1500rpm, 27.2 dBA) × 2 Rear (exhaust): 120 × 120 × 25 mm ARGB PWM fan (1500rpm, 27.2 dBA) × 1 Drive Bays Accessible: 2 × 3.5″, 2 × 2.5″ or 4 × 2.5″ Expansion Slots 7 Motherboards 6.7″ × 6.7″ (Mini ITX), 9.6″ × 9.6″ (Micro ATX), 12″ × 9.6″ (ATX), 12″ × 13″ (E-ATX) I/O Ports USB 3.0 × 2, HD Audio × 1 PSU Standard PS2 PSU (optional) Fan Support Front: 3 × 120mm, 2 × 120mm, 1 × 120mm or 3 × 140mm, 2 × 140mm, 1 × 140mm Top: 3 × 120mm, 1 × 120mm or 2 × 140mm, 1 × 140mm Right (M/B Side): 2 × 120mm, 1 × 120mm Rear: 1 × 120mm Radiator Support Front: 1 × 360mm, 1 × 240mm, 1 × 120mm or 1 × 280mm, 1 × 140mm Top: 1 × 360mm, 1 × 240mm, 1 × 120mm or 1 × 280mm, 1 × 140mm Right (M/B Side): 1 × 240mm, 1 × 120mm Rear: 1 × 120mm Clearance CPU cooler max height: 170mm VGA max length: 340mm (with radiator), 400mm (without radiator) PSU max length: 230mm (with HDD Cage)